The Accupoint 2 (Z)^TM is a lower detection limit version of the new Accupoint 2^TM loop powered moisture transmitter featuring user friendly micro-processor based electronics. A simple three button interface allows for the selection of any one of five display options and a host of output scales.

A built in pressure regulator rated at 3000 psig and on-board flow control make the Accupoint 2 (Z)^TM a self-contained system that is ready to use right out of the box. The rugged NEMA 4X enclosure allows for mounting directly at the sample point, regardless of weather conditions.

Based on Faraday's Law of Electrolysis, an absolute law of physics, the Accupoint's^TM sensor offers a calibration free, extremely high accuracy sensing system within a tightly defined range with a lower detection limit of 0.5 ppmV.

Measurement Range:
• Model F3050 (Z) - 0-20 ppmV (0.5 ppmV LDL)

Approvals:
• CE Mark approved
• Pending testing - Class 1, Division 1, Groups A, B, C and D intrinsically safe

Key Features:
• Micro-Processor based electronics
• Integral digital display
• Units of measure: ppmV, ppmW, lbs/mmscf, ºC and ºF dewpoint
• Isolated 4-20 mA output standard (2-wire mode)
• Optional bi-directional RS-232 output (3-wire mode)
• User scaleable output signal
• Operating pressure - 50-3000 psig
• Accuracy -- ±3% of reading or 0.1 ppm, whichever is greater

Click here to download the complete Accupoint 2^TM brochure in PDF format
(You will need Adobe Acrobat Reader, available for download from Adobe Systems Incorporated, in order to view PDF files.)