The MEECO Waterboy 2^TM is your cost effective solution for reliable, portable moisture analysis. With micro-processor based electronics and a simple three button interface, a choice of five display options and a host of output scales are at your fingertips.

A built in pressure regulator rated at 3000 psig, on-board flow control and a rechargeable battery make the Waterboy 2^TM a self-contained system that is ready to use right out of the box. The rugged NEMA 4X enclosure protects the internal analyzer components from the effects of ambient weather conditions.

Based on Faraday's Law of Electrolysis, an absolute law of physics, the Waterboy 2's^TM sensor offers a calibration free, high accuracy sensing system with a wide measurement range.

Measurement Range:
• Model F3200 - 0-5000 ppmV (1ppmV LDL)
• Model F3250 - 0-1000 ppmV (1ppmV LDL)

Approvals:
• CE Mark approved
• Pending testing - Class 1, Division 2, Non-Incendive

Key Features:
• Micro-Processor based electronics
• Integral alpha-numeric display
• Units of measure: ppmV, ppmW, lbs/mmscf, ºC and ºF dewpoint
• Lead acid rechargeable battery with built in charging circuit
• 0-1 vdc output, into 10K ohm or greater, field programmable
• Optional bi-directional RS-232 output
• Operating pressure - 50-3000 psig
• Accuracy -- ±5% of reading or 0.4 ppm, whichever is greater

Click here to download the complete Waterboy 2^TM brochure in PDF format
(You will need Adobe Acrobat Reader, available for download from Adobe Systems Incorporated, in order to view PDF files.)